The Shooting SHED Støtteben F/TR Bipod

  • 4 Units in Stock
  • Manufactured by: Shooting Shed Limited

 Ask a Question 

£295.00


Max: 6
Add to Cart:
The SHED Støtteben F/TR bipod MkV.

The SHED bipod is manufactured from 6082 T6, A4 and 316 stainless with some Nylon washers thrown in for good measure so it is not going to rust!

This tried and tested super wide and super light F/TR bipod is the evolution of the original SHED ‘Plain’ bipod and is lighter, wider and sleeker, it has many new features such as the T Nut assembly has a second fixing which is an M6 grub screw designed to screw into a dimple in the rail to give a second locking point and also act as a recoil lug, this means the bipod is always returned to the same position on the rifle when it is fitted. The elevation screw pitch has been reduced to give finer elevation control yet still with the left/right hand thread system so no more winding for 10 minutes to get the height you need. The feet are wider with added radiuses to give even tracking regardless of the width the bipod is set to.

Finish is vapour hone with hard anodising so a very flat black without any shiny bits to reflect light. The leg sections from the elevation fixings to the head are solid sided to give maximum rigidity and triangulation and this also gives somewhere to put the name of the bipod ‘Støtteben’ Which for those of you who do not read Danish means stabiliser. Støtteben are the stabiliser wheels children have fitted to their bicycles so now you know.

Vital Statistics:

Main bipod assembly: 6082 T6 aluminium. Finish: Vapour honed and black anodised surfaces. Screws: A4 Stainless Steel. Elevations shaft: Stainless Steel Elevation nuts: 316 stainless steel Weight: Approximately 610 grams Weight with optional toggle locks fitted: Approximately 674 grams Weight of optional toggle lock 32 grams (1.15 Ozs) Maximum recommended width: 785,0mm (31 Inches) Maximum recommended height: 380,0mm (13.5 Inches)

Accompanying the bipod is a spares/options kit comprising of:

1x Elevation nut retaining clip. 1x Toggle lock and washer.

This product was added to our catalog on Sunday 02 January, 2022.

Copyright © 2022 Shooting Shed Limited.

Repairs, restoration and bespoke modification of all types of firearms undertaken. Design and manufacture of precision reloading and shooting accessories. UK RFD Lincolnshire 3024

Shooting SHED Limited is registered as a company in England No: 08248277. All prices on this Shooting SHED website include UK VAT at the prevailing rate.VAT: GB 142 9598 80