I say again as these were for zeroing and load development however the first batch was not good so I pulled the bullets with the trusty collet puller and re-loaded again with 48 grains of N160 which hopefully will get the job done.
The rifle is a Schultz & Larsen M97-DL Sporter and this particular rifle stock is a bit unusual over here in the UK and probably not much more common in Europe. The stock is a fairly typical 300m competition type however it works well for sporting uses as well and can be shot thumb up or thumb down and has a nicely formed palm swell and adjustable cheek riser, all features that seem to fit and suit me well. Unfortunately it has always been my wife’s rifle however she has agreed to relinquish ownership to myself so she can acquire a particular Savage 99 she has been after for a while.
The rifle has a Kahles K312 fitted on Apel bases and rings and currently sports a turner all weather sling which is mine. So with some paperwork I am hoping to be the new owner hence the load development for a bullet to suit my needs.
Our reloading bench is a modest affair, to this day I still use a Lee Cast Classic that I purchased when I first started reloading many years ago. I had wanted a Redding press and eventually acquired one but soon parted with it as the Lee had become a firm favourite. I also use an RCBS Summit press for minor work such as de-capping and mandrel work. Adjacent to the Lee is a Dillon 1000 for repetitive carbine ammunition manufacture as it can churn out rounds by the hundred with very little user input other than a watchful eye. It is fitted with a Dillon case feeder and I do have a bullet feeder for it however it currently off the machine for some tweaks. Next along is a MEC Junior for 12 bore slug and I need to add a method of loading .410 slug at some point as well. Not in shot are the dies and I use a huge range of makes from Redding through Forster to Hornady and Lee with some real oddities in-between for the esoteric cartridges we load for.
Every round I load is filled with an RCBS Charge Master 1500 and it is interesting to note that I am using a Sinclair run out gauge to test every single round I make on the LEE. Interesting in that I have manufactured dozens of our own design of gauge yet I no longer own one, the same goes for neck wall thickness gauges, I have built so many yet no longer own one however I did spot some parts for one on a shelf the other day so I had better make an effort to produce one for myself and stop using the Sinclair version which I have never been a real fan of despite them performing well.
We are in the middle of a solid 3-4 week run on gun work and slowly getting through the jobs however that does not stop us from our customary visits to the Salt Marsh with the dogs and yesterday saw six of us Myself, the Viking, two adult dogs and the two pups) splashing around in the last of the Sea Lavender after a reasonably high tide. The pups are at the stage where we can let them run free and they, for the most stay near my side along with my Labrador, the Viking’s Lurcher is usually in sight doing whatever he does, probably looking for things.
Last week was the pups first time at the Marsh and they discovered water, this week they are happy to splash around and the black one was very close to swimming at one point however the water was not quite deep enough. His wiser brother tends to try and jump such obstacles if at all possible.
I note also that the black one watches the adult Labrador like a Hawk and emulates his actions which has to be a good thing unless he finds another dead seal and also rolls on it.
The yellow one is turning out well and seems to almost instinctively know what is expected of him, his black brother not so much so however he also shows a keen independence. They are truly poles apart when it comes to character and traits and it is always a joy and a privilege to be out with them.
Back to work 🙂